The Dyebrick Brick Tinting Kit is a three-part mixing system designed for the DIY enthusiast to produce a natural, permanent colour modification to brick, mortar and a variety of masonry surfaces.

The kit is comprised of:

• Concentrated colour pigment
• Fixing agent
• Carrier solution
• Disposable gloves
• Test application brush
• Mixing pot
• Detailed instruction leaflet

There are ten standard colours available.
Plus two specials, Blue Sky and Green Opal that can be used for more artistic effects!

Dyebrick can be diluted to produce different shades or may be blended with each other to produce an even wider range of colours.


Coverage:
Initial tinting fluid dilution: 20fl.oz = 162.5 sq.ft 600ml = 15m2
Intermediate dilution: 40fl.oz = 325 sq.ft 1200ml = 30m2
Maximum Dilution: 60fl.oz = 487.5 sq.ft 1800ml = 45m2

These coverage rates are based on brickwork of average porosity and smooth texture.

Please test the coverage rate of your brickwork first: This can be done by measuring out a litre of water in a jug and seeing how much area it will cover using a standard 2" pure bristle paintbrush.

Dyebrick is not suitable for painted or sealed brickwork.
Dyebrick is not guaranteed or recommended for application to horizontal surfaces subjected to wear or pedestrian traffic.